Brakes Plumbing

Front Disc Brake conversion kit was purchased from Speedway Motors
Rotors have the Ford 5.5" bolt pattern


Sunday May 18th, 2008 finally started plumbing brake lines. You can see the rebuilt drag link ends done by my Dad.


Brake pedal linkage and tee to front discs


Master cylinder and brake booster, this will be fun to fill.


This is as far as I made it to the rear, ran out of 3/16" x 24 nuts.


Shows the master cylinder hookups and the 2lb residual valve for the front discs.


Another view.